Showing results: 46 - 60 of 60 items found.
-
Gamma Scientific Inc.
Gamma Scientific is ISO/IEC 17025 accredited by NVLAP (NVLAP lab code 200823-0). In addition to assurance of measurement accuracy, accreditation ensures traceability to known standards, provides international acceptance of measured values, and is important for compliance purposes for your own ISO/IEC certifications. Our state-of-the-art, ISO 17025 accredited calibration laboratories in San Diego, California offer a range of test and calibration services including:
-
Inertial Labs, Inc.
Both the TAG-200 and TAG-300 are factory calibrated over their operational temperature range and precision machined to ensure very low non-orthogonality and misalignment between sensitive elements. Additionally these items are ITAR-free and exportable (ECCN 7A994) to available countries. Each unit is supplied with individual Calibration and Acceptance Test Certificates and goes through extensive Quality Assurance and Quality Compliance procedures to ensure product reliability before they are shipped.
-
TopLine Corp.
BGA and CCGA Column Grid Array, solder columns and a wide range of daisy chain semiconductor packages, and test vehicle PC boards. TopLine assists thousands of customers define and refine their SMT and microelectronics assembly processes. ver 1000 different dummy packages and practice kits. Typical applications include machine evaluation, acceptance testing, solder training, temperature profiling, re-certification, prototype design, practice and demonstrations.
-
National Technical Systems
UL’s testing services are organized into sections that evaluate specific types of products. To establish recognition, manufacturers are requested to submit samples for assessment in accordance with specific UL standards. NTS performs the applicable evaluation and testing of these samples and then assembles the data packet for UL review. Upon compliant results, UL then evaluates the test data and makes the final determination as to whether a product is eligible for recognition. Upon test data review and acceptance by UL, Notification of Authorization (NofA) is issued to the manufacturer to apply the UL certification mark to their products.
-
ViTec Co. Ltd
The monitoring system for the thermal state of traction electric locomotive machines is designed for:control of the thermal state of traction electric motors (TED) as part of a high-speed traction-energy car-laboratory for testing rolling stock (TEL-C) in the acceptance and certification tests of electric locomotives;control of the thermal load of the TED and the temperature distribution by volume of the TED during the operational tests of electric locomotives;experimental determination of the most heated parts of the TED under different operating conditions;display of the current thermal state of the engine to the operator of the system;storing the thermal state data in the database for later playback.
-
SLB-Series -
Eagle Eye Power Solutions
SMART Constant Current DC Load Banks are designed for acceptance testing, discharge testing, battery capacity testing, battery maintenance, engineering examination and other testing for DC power with load. The SMART technology allows a constant current discharge without the need for manual adjustment of current during the discharge test. Our SLB-Series load banks are portable, durable, economic, safe, easy-to-use and come complete with our DataView software, providing the user with a complete data management and analysis program.
-
A1QA
Interface Testingevaluation of correct system module interaction Smoke Testinginitial testing process to check whether software is ready for further testingSystem Testingconducted on a complete, integrated system to evaluate the system's compliance with its specified requirements Integration Testingperformed to test units of code to verify interaction between various software components and detect interface defectsRegression Testingtesting to ensure changes made are not impacting previously working functionality Acceptance Testingperformed to make sure the software handles required tasks in real-world scenarios, according to specifications
-
DSX CableAnalyzer™ Series -
Fluke Networks
The DSX CableAnalyzer Series copper test solution enables testing and certification of twisted pair cabling for up to 40 Gigabit Ethernet deployments and will handle any cabling system whether it is a Cat 5e, 6, 6A, 8 or Class FA and I/II. Certifying a cable is one part of a process that starts with system design and ends with system acceptance. The faster that process goes, the more profitable you'll be. Unfortunately, there are a lot of things that slow the process down setting up the tester incorrectly, testing to the wrong limits, waiting for skilled technicians to analyze and troubleshoot failures, misinterpretation of results, and producing test reports that customers cannot understand.
-
TS-217 -
Marvin Test Solutions, Inc.
The TS-217 is an I-level and Depot-level Universal Launcher test set supporting fighter aircraft launchers including the LAU-127, LAU-128, and LAU-129 (AMRAAM), LAU-117 and LAU-88 (Maverick), and LAU-7 (Sidewinder) missile launchers, launcher electronic assemblies, launcher power supplies, and circuit cards. The TS-217 is also used as a depot-level tester for F-18 armament including launchers (LAU-127, LAU-7, LAU-115, and LAU-116), bomb racks (BRU-32), and aircraft pylons (SUU-62 and SUU-63). Additionally, the TS-217 supports MAU-169 Paveway kits, subassemblies, and circuit cards. The TS-217 performs full parametric functional testing as well as troubleshooting to the faulty LRU (I-Level configuration) and SRU (Depot-Level configuration). The TS-217 can be used as an I-Level tester or as a Depot / Acceptance tester for launcher subassemblies.
-
National Technical Systems
PCB testing, or printed circuit board testing, begins with understanding that the PCB is the foundation for any printed circuit assembly (PCA).The circuit board is a top quality product that should not cause your end product to cost you money due to failures and recalls. NTS is an internationally accredited test laboratory approved for PCB testing including the bare PCB, the raw materials that the PCB is comprised of, as well as the finished PCA. The most commonly used PCB testing performance specifications for qualification, acceptance, and/or conformance are IPC-6012, IPC-6013, IPC-6016, IPC-6018, MIL-PRF-55110, MIL-P-50884, or MIL-PRF-31032.
-
TUV Rheinland Inc
The CB scheme is an international program promoting global harmonisation and the reduction of trade barriers. Originally implemented to coordinate the acceptance of product safety test results among laboratories and certification organisations worldwide, the CB scheme provides manufacturers multiple national safety certifications for their products with a single CB certificate.The CB scheme actually consists of one single audit and certification procedure to demonstrate the safety of your electrical products to the world's most important markets. Our experts can audit your goods and support you during international product homologation. The advantage of obtaining the CB certificate, the supplemental CB report and further country-specific documents is easier access to acquiring mandated national audit seals.
-
Focus-2005 -
Kyoritsu Testsystem Co., Ltd.
As a screening checker to detect defective devices(mainly electrostatic destruction)which are returned from fields before failure analysis process of IC/LC in the quality assurance division of semiconductor manufacture.As a screening checker to detect defective devices before acceptance inspection by IC/LSI expensive tester at semiconductor company(trading, manufacture)Short/Open checker for semiconductor sensor device.It is possible to measure two kinds of measurements which are constant voltage biased current measurement and constant current biased voltage measurement. User can set the threshold of 10 ranks. （auto measurement）Only device can be measured. It is also possible to fabricate the test fixture.Various devices can be measured by replacing the socket board.It is no need to generate complex test programs as reference values are calculated from good device.It can be expanded by adding multiplexer boards which are 128pins per one board.(MAX 2048pins)
-
Anderon Meters -
MOTOMEA
*Measures the anderon value in an assembled bearing.*Detects slight surface irregularities arising from machining imperfections and other factors.*Detects displacement in a radial direction caused by rolling surface irregularities.*Provides the “anderon” value, a numerical expression of the degree of vibration and noise in the bearing, allows quantitative assessment of bearing performance.*Enables the discovery of the causes of vibrations (scratches on the raceways of outer and inner races made during machining, scratches on ball surfaces, contamination by dust particles, etc.).*Enables the sorting of bearings by precision class and more accurate assessment of bearing quality.*Development of high-quality products: aids in the development of high-quality, durable bearings that generate minimal vibration and noise.*Assurance of product quality: allows data to be gathered that can be used for objective assessment of quality, particularly vibration and noise characteristics.*Optimal management of products by quality: High-sensitivity detection of minute but critical variations in product characteristics, allowing to sort bearings accurately by quality for optimal product management.*Improved productivity: allows inspection of bearings before installation in high-precision, high-performance products susceptible to vibration, minimizing defects in assembled products and improving productivity.*Optimal parts control in the open market environment: permits high-accuracy acceptance inspections of delivered parts, allowing to test various samples obtained from both domestic and overseas manufacturers to help secure parts that offer optimal quality.
-
Heidenhain Corp.
HEIDENHAIN offers testing and inspection devices that deliver all setup, monitoring, and diagnostic data needed for the analysis of its encoders. Grid encoders from HEIDENHAIN are ideal for machine tool inspection and acceptance testing, accurately measuring CNC machine tool movements in both static and dynamic inspection.
-
Heidenhain Corp.
HEIDENHAIN offers comparator encoders for the calibration and acceptance testing of machine tools. These modular sytems deliver very high measurement accuracies with optical scanning and a sturdy measuring standard. Robust and easy-to-use, they are well-equipped for frequent usage under shopfloor conditions.
